Journal Information
Vol. 8. Issue 3.
Pages 2481-3388 (May - June 2019)
Editorial Board
J Mater Res Technol. 2019;8:i
Open access
Original articles
Influence of permanent magnetic fields on creep and microhardness of iron-containing aluminum alloy
Arkadiy A. Skvortsov, Danila E. Pshonkin, Mikhail N. Luk’yanov, Margarita R. Rybakova
J Mater Res Technol. 2019;8:2481-5
Open access
Microstructure and magnetic properties of amorphous/nanocrystalline Ti50Fe50 alloys prepared by mechanical alloying
Yongbo Xu, Yajuan Sun, Xiaoqin Dai, Bangquan Liao, Shengfeng Zhou, Dongchu Chen
J Mater Res Technol. 2019;8:2486-93
Open access
Tension Failure Simulation of Notched Composite Laminate Using Floating Node Method Combined with In-Situ Effect Theory
Kun Tian, Song Zhou, Chaozhi Yang, Jinhua Zhang, Chaobin Zhou
J Mater Res Technol. 2019;8:2494-507
Open access
Investigation of desulfurization of Inconel 718 superalloys by ESR type slags with different TiO2 content
Sheng-Chao Duan, Xiao Shi, Fei Wang, Man-Cang Zhang, Bin Li, Wen-Sheng Yang, Han-Jie Guo, Jing Guo
J Mater Res Technol. 2019;8:2508-16
Open access
Residual stress characterization in friction stir welds of alloy 625
Guilherme Vieira Braga Lemos, Alexandre Bellegard Farina, Rafael Menezes Nunes, Pedro Henrique Costa Pereira da Cunha, Luciano Bergmann, Jorge Fernandez dos Santos, Afonso Reguly
J Mater Res Technol. 2019;8:2528-37
Open access
Thermal stability of Al–Fe–Ni alloy at high temperatures
Zeyu Bian, Shihan Dai, Liang Wu, Zhe Chen, Mingliang Wang, Dong Chen, Haowei Wang
J Mater Res Technol. 2019;8:2538-48
Open access
Technical and environmental evaluation of a new high performance material based on magnesium alloy reinforced with submicrometre-sized TiC particles to develop automotive lightweight components and make transport sector more sustainable
Victor Ferreira, Mikel Merchán, Pedro Egizabal, Maider García de Cortázar, Ane Irazustabarrena, Ana M. López-Sabirón, German Ferreira
J Mater Res Technol. 2019;8:2549-64
Open access
Mullite cytotoxicity and cell adhesion studies
Leandro Fernandes, Renata Aquino de Carvalho, Andre Capaldo Amaral, Edison Pecoraro, Rafael Salomão, Eliane Trovatti
J Mater Res Technol. 2019;8:2565-72
Open access
Manufacturing optimisation of an original nanostructured (beta+gamma)-TiNbTa material
Cristina García-Garrido, Carlos Gutiérrez-González, Ramón Torrecillas, Luis Pérez-Pozo, Christopher Salvo, Ernesto Chicardi
J Mater Res Technol. 2019;8:2573-85
Open access
Comparative study of K2SO4 production by wet conversion from phosphogypsum and synthetic gypsum
Yassine Ennaciri, Hanan El Alaoui-Belghiti, Mohammed Bettach
J Mater Res Technol. 2019;8:2586-96
Open access
Characterization of cellulosic fibre from Phoenix pusilla leaves as potential reinforcement for polymeric composites
P. Madhu, M.R. Sanjay, S. Pradeep, K. Subrahmanya Bhat, B. Yogesha, Suchart Siengchin
J Mater Res Technol. 2019;8:2597-604
Open access
Abrasion resistance and toughness of a ductile iron produced by two molding processes with a short austempering
J.R. Dueñas, W. Hormaza, G.M. Castro Güiza
J Mater Res Technol. 2019;8:2605-12
Open access
Influence of dwell time on microstructure evolution and mechanical properties of dissimilar friction stir spot welded aluminum–copper metals
Gaohui Li, Li Zhou, Weilu Zhou, Xiaoguo Song, Yongxian Huang
J Mater Res Technol. 2019;8:2613-24
Open access
Toughness properties of a friction hydro pillar processed offshore mooring chain steel
Diogo Trento Buzzatti, Mariane Chludzinki, Rafael Eugenio dos Santos, Jonas Trento Buzzatti, Guilherme Vieira Braga Lemos, Fabiano Mattei, Ricardo Reppold Marinho, Marcelo Torres Piza Paes, Afonso Reguly
J Mater Res Technol. 2019;8:2625-37
Open access
Linear and crosslinked polyimide aerogels: synthesis and characterization
Carolina Simón-Herrero, Xiao-Yuan Chen, Maria Luz Ortiz, Amaya Romero, José L. Valverde, Luz Sánchez-Silva
J Mater Res Technol. 2019;8:2638-48
Open access
Effects of melting-mixing ratio on the interfacial microstructure and tensile properties of austenitic–ferritic stainless steel joints
Xu Zhang, Yu Zhang, Yudong Wu, Sansan Ao, Zhen Luo
J Mater Res Technol. 2019;8:2649-61
Open access
Low velocity impact behaviour and post-impact characteristics of kenaf/glass hybrid composites with various weight ratios
Muhammad F. Ismail, Mohamed T.H. Sultan, Ahmad Hamdan, Ain U.M. Shah, Mohammad Jawaid
J Mater Res Technol. 2019;8:2662-73
Open access
Inspection of casting defects and grain boundary strengthening on stressed Al6061 specimen by NDT method and SEM micrographs
A. Bovas Herbert Bejaxhin, G. Paulraj, M. Prabhakar
J Mater Res Technol. 2019;8:2674-84
Open access
Erosion and corrosion resistance of plasma electrolytic oxidized 6082 aluminum alloy surface at low and high temperatures
Ali Algahtani, Essam R.I. Mahmoud
J Mater Res Technol. 2019;8:2699-709
Open access
Evaluation of the physical properties of fluorescent carbon nanodots synthesized using Nerium oleander extracts by microwave-assisted synthesis methods
Sinem Simsek, Melis Ozge Alas, Belma Ozbek, Rukan Genc
J Mater Res Technol. 2019;8:2721-31
Open access
Treatment from abandoned mine landfill leachates. Adsorption technology
Julia Ayala, Begoña Fernández
J Mater Res Technol. 2019;8:2732-40
Open access
Theoretical confirmation of an established experimental phase diagram of ternary system (Cu(SO4)–Zn(SO4)–H2O) at 25°C: Pitzer parameters determination
Bouchra Mekkaoui, Mohamed Jouaiti, Abderrahim Barroug, Ahmed Jouaiti, Latifa Laallam
J Mater Res Technol. 2019;8:2741-6
Open access
Deterioration in the microstructure of metakaolin-based geopolymers in marine environment
Xing Li, Feng Rao, Shaoxian Song, Qinyong Ma
J Mater Res Technol. 2019;8:2747-52
Open access
Sugar palm (Arenga pinnata (Wurmb.) Merr) cellulosic fibre hierarchy: a comprehensive approach from macro to nano scale
Rushdan Ahmad Ilyas, Salit Mohd Sapuan, Rushdan Ibrahim, Hairul Abral, M.R. Ishak, E.S. Zainudin, Mochamad Asrofi, Mahmud Siti Nur Atikah, Muhammad Roslim Muhammad Huzaifah, Ali Mohd Radzi, Abdul Murat Noor Azammi, Mohd Adrinata Shaharuzaman, Norizan Mohd Nurazzi, Edi Syafri, Nasmi Herlina Sari, Mohd Nor Faiz Norrrahim, Ridhwan Jumaidin
J Mater Res Technol. 2019;8:2753-66
Open access
Structural, morphological, optical, and gas sensing characteristics of ultraviolet-assisted photoelectrochemical etching derived AlInGaN nano-spikes
Way Foong Lim, Zainuriah Hassan, Hock Jin Quah
J Mater Res Technol. 2019;8:2767-76
Open access
Physical and mechanical properties of flowable composite incorporated with nanohybrid silica synthesised from rice husk
Nazrul M. Yusoff, Yanti Johari, Ismail Ab Rahman, Dasmawati Mohamad, Mohd Fadhli Khamis, Zaihan Ariffin, Adam Husein
J Mater Res Technol. 2019;8:2777-85
Open access
Comparison of Kambara reactor slag with blast furnace slag for Portland cement industry applications
Ana Carolina de Oliveira Dieguez, Samantha Luchi Nascimento Oliveira, Georgia Serafim Araújo, André Gustavo de Sousa Galdino
J Mater Res Technol. 2019;8:2786-95
Open access
Nanoscale structural investigation on Ti-6Al-4V implants produced by using selective laser melting technique: The importance of production angle
Ahmet Bayirli, Semra Ide, Ilghar Orujalipour, Osman Demir, Murat Dursun, Hakan Ates
J Mater Res Technol. 2019;8:2796-801
Open access
Photocatalytic Activity of Nickel Oxide
Adawiya J. Haider, Riyad Al- Anbari, Hiba M. Sami, Mohammed J. Haider
J Mater Res Technol. 2019;8:2802-8
Open access
New photocatalytic materials obtained from the recycling of alkaline and Zn/C spent batteries
Lorena Alcaraz, Irene García-Díaz, Laura González, María Eugenia Rabanal, Ana Urbieta, Paloma Fernández, Félix A. López
J Mater Res Technol. 2019;8:2809-18

  • Several types of Zn/Mn oxide were produced from the spent alkaline batteries.

  • Photocatalysis experiments are carried out.

  • Degradation of methylene blue and Rhodamine B is evaluated under UV radiation.

  • All the compounds studied show photocatalytic properties.

Open access
Polymeric organic coatings based on PANI-ES and PANI-ES/APP for fire protection
Alessandra Fiorini Baldissera, Mauro Ricardo da Silva Silveira, Carlos Henrique Beraldo, Nicolle Sturzbecher Tocchetto, Carlos Arthur Ferreira
J Mater Res Technol. 2019;8:2832-45
Open access
Developing high-strength, ductile Ni-free Fe–Cr–Mn–C–N stainless steels by interstitial-alloying and thermomechanical processing
Dariush Rasouli, Ahmad Kermanpur, Abbas Najafizadeh
J Mater Res Technol. 2019;8:2846-53
Open access
Role of preparation technique in the morphological structures of innovative nano-cation exchange
Hassan Shokry Hassan
J Mater Res Technol. 2019;8:2854-64
Open access
Material selection of natural fibre using a stepwise regression model with error analysis
Muhammad Noryani, Salit Mohd Sapuan, Mohammad Taha Mastura, Mohd Yusoff Moh Zuhri, Edi Syams Zainudin
J Mater Res Technol. 2019;8:2865-79
Open access
Effect of applied magnetic field on wear behaviour of martensitic steel
Licai Fu, Lingping Zhou
J Mater Res Technol. 2019;8:2880-6
Open access
Effect of iron content on βα phase transformation behavior of Ti-5Al-xFe (x=1, 2.5, 4) alloys during continuous cooling
Gyeong Ryeong Bak, Jong Woo Won, Hye-Jeong Choe, Chan Hee Park, Yong-Taek Hyun
J Mater Res Technol. 2019;8:2887-97
Open access
Improved photocatalytic decomposition of aqueous Rhodamine-B by solar light illuminated hierarchical yttria nanosphere decorated ceria nanorods
C. Maria Magdalane, K. Kaviyarasu, G. Maria Assuntha Priyadharsini, A.K.H. Bashir, N. Mayedwa, N. Matinise, Abdulgalim B. Isaev, Naif Abdullah Al-Dhabi, Mariadhas Valan Arasu, S. Arokiyaraj, J. Kennedy, M. Maaza
J Mater Res Technol. 2019;8:2898-909
Open access
Purification, characterization and application of cherty rocks as sorbent for separation and preconcentration of rare earths
Imen Bouchmila, Bochra Bejaoui Kefi, Radhia Souissi, Mohieddine Abdellaoui
J Mater Res Technol. 2019;8:2910-23
Open access
Influence of an aging step on the synthesis of zeolite NaA from Brazilian Amazon kaolin waste
Ana Áurea B. Maia, Rafael N. Dias, Rômulo S. Angélica, Roberto F. Neves
J Mater Res Technol. 2019;8:2924-9
Open access
Iron oxides as efficient sorbents for CO2 capture
Eduin Yesid Mora Mendoza, Armando Sarmiento Santos, Enrique Vera López, Vadym Drozd, Andriy Durygin, Jiuhua Chen, Surendra K Saxena
J Mater Res Technol. 2019;8:2944-56
Open access
Microstructure homogeneity of milled aluminum A356–Si3N4 metal matrix composite powders
Heydi Fernández, Stella Ordoñez, Hector Pesenti, Rodrigo Espinoza González, Matteo Leoni
J Mater Res Technol. 2019;8:2969-77
Open access
Microemulsions and nanoemulsions applied to iron ore flotation
Maria Carlenise P.A. Moura, Afonso Avelino Dantas Neto, Antonio Eduardo C. Peres, Paula Romyne M.C. Neitzke, Tereza Neuma de Castro Dantas
J Mater Res Technol. 2019;8:2978-86
Open access
Barrier improvement of the biaxial oriented polypropylene films using passive mechanisms
Hamid Reza Shayanipour, Reza Bagheri
J Mater Res Technol. 2019;8:2987-95
Open access
Structural and electrical properties of Ca0.9Dy0.1MnO3 prepared by sol-gel technique.
K.R. Nandan, A. Ruban Kumar
J Mater Res Technol. 2019;8:2996-3003
Open access
Corrosion protection of aluminum by smart coatings containing layered double hydroxide (LDH) nanocontainers
Iman Imanieh, Abdollah Afshar
J Mater Res Technol. 2019;8:3004-23
Open access
New approaches in lowering the gas-phase synthesis temperature of TiO2 nanoparticles by H2O-assisted atmospheric pressure CVS process
Mostafa Rahiminezhad-Soltani, Kamal Saberyan, Abdolreza Simchi, Christoph Gammer
J Mater Res Technol. 2019;8:3024-35
Open access
Separation and recovery of iron and titanium from oxidized vanadium titano-magnetite by gas-based reduction roasting and magnetic separation
Yulei Sui, Yufeng Guo, Tao Jiang, Guan-zhou Qiu
J Mater Res Technol. 2019;8:3036-43
Open access
Laser welding of AZ31B magnesium alloy with beam oscillation
Kangda Hao, Hekang Wang, Ming Gao, Run Wu, Xiaoyan Zeng
J Mater Res Technol. 2019;8:3044-53
Open access
Multi-objective optimization and modeling of age hardening process using ANN, ANFIS and genetic algorithm: Results from aluminum alloy A356/cow horn particulate composite
Chidozie Chukwuemeka Nwobi-Okoye, Basil Quent Ochieze, Stanley Okiy
J Mater Res Technol. 2019;8:3054-75
Open access
Optimization of hematite and quartz BIOFLOTATION by AN artificial neural network (ANN)
Antonio Gutiérrez Merma, Carlos Alberto Castañeda Olivera, Ronald Rojas Hacha, Maurício Leonardo Torem, Brunno Ferreira dos Santos
J Mater Res Technol. 2019;8:3076-87
Open access
Potentiodynamic polarization studies of Cefadroxil and Dicloxacillin drugs on the corrosion susceptibility of aluminium AA6063 in 0.5M nitric acid
Ojo Sunday Isaac Fayomi, I.Godwin Akande, Abimbola Popoola Idowu Popoola, Hlatswayo Molifi
J Mater Res Technol. 2019;8:3088-96
Open access
Fabrication of pandanus tectorius (screw-pine) natural fiber using vacuum resin infusion for polymer composite application
Lukmon Owolabi Afolabi, Puteri Sri Melor Megat-Yusoff, Zulkifli Mohamad Ariff, Muhammad Syahmi Hamizol
J Mater Res Technol. 2019;8:3102-13
Open access
Effect of electropulsing on microstructure and hardness of cold-rolled low carbon steel
Reza Alaghmand Fard, Mohsen Kazeminezhad
J Mater Res Technol. 2019;8:3114-25
Open access
An Al–7Si alloy/cast iron bimetallic composite with super-high shear strength
Zhilin Guo, Min Liu, Xiufang Bian, Meijia Liu, Jianguo Li
J Mater Res Technol. 2019;8:3126-36
Open access
Impact of solid-solution treatment on microstructural characteristics and formability of rotary-swaged 2024 alloy tubes
Chia-Wei Lin, Kuan-Jen Chen, Fei-Yi Hung, Truan-Sheng Lui, Hsuan-Po Chen
J Mater Res Technol. 2019;8:3137-48
Open access
The cross-linked polyvinyl alcohol/hydroxyapatite nanocomposite foam
Amir Ali Ashraf, Seyed Mojtaba Zebarjad, Mohammad Jafar Hadianfard
J Mater Res Technol. 2019;8:3149-57
Open access
Synthesis and characterization of mesoporous hydroxyapatite powder by microemulsion technique
An Huang, Honglian Dai, Xiaopei Wu, Zheng Zhao, Yanzeng Wu
J Mater Res Technol. 2019;8:3158-66
Open access
Microstructural characteristics of magnesium alloy sheets subjected to high-speed rolling and their rolling temperature dependence
Jeong Hun Lee, Sang Won Lee, Sung Hyuk Park
J Mater Res Technol. 2019;8:3167-74
Open access
Analysis of surface roughness evolution of ferritic stainless steel using crystal plasticity finite element method
Xiaoguang Ma, Jingwei Zhao, Wei Du, Xin Zhang, Zhengyi Jiang
J Mater Res Technol. 2019;8:3175-87
Open access
Porous NbAl3/TiAl3 intermetallic composites with controllable porosity and pore morphology prepared by two-step thermal explosion
Xiaoping Cai, Xiang Bo, Peizhong Feng, Xuanru Ren, Xueqin Kang, Cheng Xu, Ping Zhang
J Mater Res Technol. 2019;8:3188-97
Open access
Reinforcement of Aramid fiber with bagasse epoxy bio-degradable composite: investigations on mechanical properties and surface morphology
Selvaraj Anidha, Nachimuthu Latha, Manickam Muthukkumar
J Mater Res Technol. 2019;8:3198-212
Open access
Microstructural evaluation of aluminium alloy A365 T6 in machining operation
Bankole. I. Oladapo, S. Abolfazl Zahedi, Francis.T. Omigbodun, Edwin A. Oshin, Victor A. Adebiyi, Olaoluwa B. Malachi
J Mater Res Technol. 2019;8:3213-22
Open access
On the pitting resistance of friction stir welded UNS S82441 lean duplex stainless steel
Antonio Marcos dos Santos Leite, Maysa Terada, Victor Ferrinho Pereira, Eduardo Bertoni da Fonseca, Nelson Batista de Lima, Isolda Costa
J Mater Res Technol. 2019;8:3223-33
Open access
Thermal behavior of biodegradable bionanocomposites: influence of bentonite and vermiculite clays
Raimundo Miguel Silva Júnior, Thainá Araújo de Oliveira, Luis Miguel Araque, Tatianny Soares Alves, Laura Hecker de Carvalho, Renata Barbosa
J Mater Res Technol. 2019;8:3234-43
Open access
Application of nitrogen doped bamboo-like carbon nanotube for development of electrically conductive lubricants
László Vanyorek, Dávid Kiss, Ádám Prekob, Béla Fiser, Attila Potyka, Géza Németh, László Kuzsela, Dirk Drees, Attila Trohák, Béla Viskolcz
J Mater Res Technol. 2019;8:3244-50
Open access
Thermal stability of ultrafine grained AA8090 Al–Li alloy processed by repetitive corrugation and straightening
Jenix Rino John Xavier Raj, Balasivanandha Prabu Shanmugavel
J Mater Res Technol. 2019;8:3251-60
Open access
Visible light active indigo dye/graphene/WO3 nanocomposites with excellent photocatalytic activity
Muhammad Yousaf Khan, Manzoor Ahmad, Sana Sadaf, Saleem Iqbal, Faisal Nawaz, Javed Iqbal
J Mater Res Technol. 2019;8:3261-9
Open access
The effect of temperature on microstructure and mechanical properties of Al/Mg lap joints manufactured by magnetic pulse welding
Congcong Zhu, Liqiang Sun, Wenli Gao, Guangyao Li, Junjia Cui
J Mater Res Technol. 2019;8:3270-80
Open access
Optimization of the hot forging parameters for 4340 steel by processing maps
Aneta Łukaszek-Sołek, Janusz Krawczyk, Tomasz Śleboda, Jacek Grelowski
J Mater Res Technol. 2019;8:3281-90
Open access
Superior energy storage performance in Pb0.97La0.02(Zr0.50 Sn0.43Ti0.07)O3 antiferroelectric ceramics
Haojie Xu, Yu Dan, Kailun Zou, Guang Chen, Qingfeng Zhang, Yinmei Lu, Yunbin He
J Mater Res Technol. 2019;8:3291-6
Open access
Review articles
Physical properties characterization of a peritectic mold flux formed from the addition of calcitic marble residue in the commercial one
Igor Teixeira da Costa, Cássio Santos de Carvalho, José Roberto de Oliveira, Estéfano Aparecido Vieira
J Mater Res Technol. 2019;8:3297-305
Open access
Parametric review of microwave-based materials processing and its applications
Praveen Kumar Loharkar, Asha Ingle, Suyog Jhavar
J Mater Res Technol. 2019;8:3306-26
Open access
Effects of fibre treatment on mechanical properties of kenaf fibre reinforced composites: a review
Muhammad.H. Hamidon, Mohamedb T.H. Sultan, Ahmad H. Ariffin, Ain U.M. Shah
J Mater Res Technol. 2019;8:3327-37
Open access
Dry sliding wear characteristics of aluminium metal matrix composites: a brief overview
Nosa Idusuyi, John I. Olayinka
J Mater Res Technol. 2019;8:3338-46
Open access
Characterization of Al-7075 metal matrix composites: a review
Mohammed Imran, A.R. Anwar Khan
J Mater Res Technol. 2019;8:3347-56
Open access
Transparent glass–ceramics for ballistic protection: materials and challenges
Leonardo Sant’Ana Gallo, Mariana O.C. Villas Boas, Ana C.M. Rodrigues, Francisco C.L. Melo, Edgar D. Zanotto
J Mater Res Technol. 2019;8:3357-72
Open access
Short communications
Microstructure-based behavior law for globular pearlitic steels
Sébastien Y.P. Allain, Amandine Roth, Olivier Bouaziz, Enrico D’Eramo
J Mater Res Technol. 2019;8:3373-6
Open access
Structural, optical, magnetic and electrochemical properties of pure and cobalt-doped cadmium monosulfide by the hydrothermal process
Chinnadurai Ramamoorthy, Varadharajan Rajendran
J Mater Res Technol. 2019;8:3377-81
Open access
Journal of Materials Research and Technology

Subscribe to our newsletter

Cookies policy
To improve our services and products, we use cookies (own or third parties authorized) to show advertising related to client preferences through the analyses of navigation customer behavior. Continuing navigation will be considered as acceptance of this use. You can change the settings or obtain more information by clicking here.